Lilith (Diablo IV) - Daughter of Hatred

"Praise the Mother!"

Bring the Creator of Sanctuary directly into your home. This breathtaking, highly detailed statue features Lilith, the Daughter of Hatred and main antagonist from Diablo IV

The model perfectly captures her majestic and formidable presence – from the massive, bony wings and striking horns to the delicate textures of her raiment. An absolute must-have for every Diablo fan, gamer, and lover of dark fantasy art!

Printing & Crafting Tips:

• Warning, challenging print! The wings and delicate fingers/claws require very carefully placed support structures
• SLA / Resin recommended: To perfectly bring out the fine textures of the dress and skin, a resin printer is ideal
• FDM Printing: If printing with PLA or PETG, be sure to use a 0.2 mm nozzle (if available) and print slowly. Use only Tree Supports (tree structures), as these are easier to remove from the organic shapes of the wings and horns without damaging the model

I am very excited to see your results and paint jobs! If you like the model, feel free to leave a like and share your makes

Print Settings (print profile / Settings)

Recommendation for FDM (Bambu Lab etc.):

• nozzle: 0.2 mm (strongly recommended for these details!) or 0.4 mm
• Layer Height: 0.06 mm - 0.08 mm (Extra Fine)
• Wall Loops: 3 (Important, so that the thin wingtips do not break off when removing the supports)
• Infill: 10% - 15% (Gyroid)
• Supports: Enabled (Mandatory!)
  • Style: Tree (Slim) or Tree (Organic)
  • Tip: In the slicer, make sure that the face is spared from supports if possible by tilting the model slightly backwards
• Build Plate Adhesion (brim): Yes (Outer brim), as the figure will be quite tall and heavy

Recommendation for SLA (Resin):

• Layer Height: 0.03 mm - 0.05 mm
• Supports: Light/Medium Supports. Be sure to minimize contact points on the front of the dress and face

This is an unofficial, fan-made 3D model (fan art). All rights to the character, design, and associated franchise depicted belong solely to the original creators, rights holders, and publishers. This model was created out of pure fan passion and is intended exclusively for private, non-commercial use. Selling these 3D files or the resulting physical models is not permitted.

🧩 Quality & Feedback
• Please post a "Make" with a photo – this helps others and improves visibility.
• Feedback/Issues: Briefly state: Printer, material, layer height, temperature, photo of the problem area.

📄 License / Usage
• Private use according to the model license.
• Commercial use (sales/shop/production) only with an appropriate commercial license membership.

🛠️ Troubleshooting (Briefly)
• Stringing: Lower temperature slightly + check retraction/travel.
• Elephant's foot: Reduce first layer flow/temperature or use Elephant-Foot Compensation.
• Connector too tight: Check calibration/flow, do not scale; if necessary, lightly sand.

My Setup – for a better overview and as a transparent insight into my current equipment. This is how my personal work and technology setup is presented.