Aeropress and Filter Under Cabinet Holder
Print Profile(1)
Description
These are under cabinet mounts to hold an Aeropress, filters and the mesh lid while not in use. Filters can easily be removed and refilled, with a capacity a bit over of a refill pack (350). The mesh lid is screwed into the bottom of the filter holder, allowing all items to be stored off the counter freeing up space while still easily accessible and able to dry.
Due to multiple overhangs and a challenging print orientation, the filter housing is printed in 2 pieces. Just put a tiny dab of glue in each hole, align the pegs (the rear peg goes into the hole near the seam on the mesh lid holder) and press together and allow to dry. This is my first model using cut and add connectors and it's made assembling difficult parts a breeze!
The center hole in the mesh lid allows for a screwdriver of any size to enter to the top 4mm concave hole to secure under your cabinet.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)