Side Stand Enlarger BMW R 1250 GS LC

Side stand enlarger and raiser for the BMW R 1200 GS and R 1250 GS LC.

Because my motorcycle repeatedly sank into soft ground, I designed and printed this enlarger.

Now the bike can also be safely parked on meadows and loose gravel.

I printed the part from PC-CF, as this filament is UV and temperature resistant and also very strong.

ASA or PETG with CF should also work well.

I drilled M5 threads into the printed holes and fastened it using 3 countersunk washers and 3 M5x12 stainless steel screws.

Of course, brass inserts can also be melted in.

Have fun reproducing it!