Female Warrior Sculpture
Print Profile(1)
Description
The Female Warrior Sculpture is a fantasy warrior figure with strong armor lines, a grounded stance, and a dramatic sword pose.
“Spanish Copper” Rub n Buff Wax was used on the model after it was printed.
Boost Me (for free)
She came with armor, attitude, and absolutely no patience for skipped boosts ;)
Current Size
Height: 20cm (~7.9")
Width: ~8cm (~3")
Material Used
Black PLA - Elegoo
Rub n Buff Wax - Spanish Copper
Printing
- Current height can be resized.
- Changing the height or the print layers might reduce the print time.
- Use a clean print plate with some glue (unless you are using a super tack plate)
- Use dried out filament.
- Depending on the filament you choose, you may want to adjust the settings
Support is needed. Please keep the positioning and the support settings as is as the settings have been adjusted to minimize scaring and proper printing.
Support Removal
- Be careful when removing the support around sword and heals. The rest should come off easy.
- Let the model cool down before removing the supports.
- Use pliers when removing the supports.
Light sanding and gentle, controlled heat may be needed to clean up areas where the supports were attached. If applying heat be careful to avoid warping or damaging the print.
If you like this design, please leave a rating, a comment or a boost.
Boost Me (for free)
She didn’t skip leg day… don’t skip the boost button :D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)