Pokemon Red
Print Profile(1)
Bill of Materials
Description
Print with 100% infill and a layer height of 0.08 mm with a base layer of 0.16mm
The model measures 140x135.44mm in size
You can print at higher layer heights below the base thickness of 0.48 mm
The maximum allowed thickness is 2.88mm and the actual thickness is 2.88mm
#000000 PLA Bambulab Basic Black Transmission distance: 0.6
#00358e PLA Bambulab Basic Blue Transmission distance: 4
#fce300 PLA Bambulab Basic Yellow Transmission distance: 6
#ff9016 PLA Bambulab Basic Pumpkin Orange Transmission distance: 5.5
#c00d1e PLA Bambulab Basic Red Transmission distance: 4
#0086d6 PLA Bambulab Basic Cyan Transmission distance: 3.5
#ffffff PLA Bambulab Basic Jade White Transmission distance: 5
This print uses 7 unique filaments
Swap instructions:
Start with Black
At layer #8 (0.72mm) change to Blue
At layer #12 (1.04mm) change to Yellow
At layer #19 (1.6mm) change to Pumpkin Orange
At layer #22 (1.84mm) change to Red
At layer #26 (2.16mm) change to Cyan
At layer #30 (2.48mm) change to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)