Oval Baroque Ornate Wall Art Frame

For any commercial license or support, my Patreon is available here : Patreon or Makerworld membership

THE MODEL :

Elevate your finest botanical prints, pressed herbariums, or vintage photographs with this magnificent Baroque-inspired oval wall frame. This design stands out with its perfect elliptical opening, surrounded by dense, opulent ornamentation featuring sweeping scrolls and Rococo motifs sculpted in high relief. Its elegant curves bring a unique geometric softness and striking depth that breaks away from traditional flat, rectangular frames. It is the ideal accent piece to compose a romantic gallery wall, complement a high-end cozy cottagecore home decor, or act as an ornate border for an entryway vanity mirror.

Tested Print Settings (Recommendations): The fluid lines of the elliptical profile and the fine details of the carvings were successfully verified using matte black PLA.

• Infill: Printed at 5% for the lightweight or empty decorative wall setup. Handy Tip: If you plan to back this frame with a heavy wooden board or insert real glass mirror plates, push the infill up to 20% and run 4 wall loops (perimeters) to secure maximum stiffness against the weight.
• Nozzle: 0.4 mm
• Supports: Light tree supports are recommended beneath the thickest outer overhanging scrolls depending on your flat layout position on the build plate.

Sizing Information: The frame's dimensions are proportioned to deliver a balanced visual impact on any wall surface. Please feel free to freely rescale the model inside your slicing software to perfectly match the inner oval window to the exact measurements of the artwork or mirror plate you intend to showcase.

INFORMATION:

A common question is: why do these prints require supports when they could be printed lying flat?

For my designs, I deliberately choose to print them standing upright rather than flat, in order to achieve the best possible level of detail. I prioritize visual quality over saving a few grams of filament.

Of course, you are free to change the print orientation in your slicer if you prefer.

FILES :

All models are available for download in 3MF format. We recommend using Bambu Studio (Bambu Lab's slicer), as some specific modifications may only be visible within this software.