Search models, users, collections, and posts
ZOHD Altus Walksnail Avatar GT2 nose cone
Remixed by
IP Report
Print Profile(1)
0.16mm layer, 1 walls, 15% infill
Designer
1.3 h
1 plate
Open in Bambu Studio
Boost
2
4
0
0
2
3
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2.
I have added a cut-out for easier access to the SD card. The camera has a small amount of tilt adjustment, and I have also added locking screws for the antennas, allowing their extension to be adjusted as well.
To install the GT2 kit, you will need:
- VTX: 4 × M2 × 4–5 mm screws
- Camera: 4 × M2 × 5 mm screws
- Antennas: 2 × M2.5 × 5 mm screws (these holes must be threaded/tapped)
This nose cone is specifically designed to accommodate the Walksnail Avatar GT2 system. Mounted to the front plate using 2x M2,5 OEM bolts.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)