Bambu Lab A1 sparkx i7 Damper (A2L Black Tech Damper is similar)
Print Profile(1)
Description
Inspired by A2L, this similar damper was designed for A1 and sparkx i7. Theoretically effective, it is recommended to recalibrate for vibration pattern optimization after installation.
Required materials: 1.5mm steel balls, fill the damper box 50-70% full (if no steel balls, you can try molecular sieves or similar, but the effect may not be as good as steel balls).
Installation instructions: The model is designed to utilize the flexibility of plastic. Clip it on from the back, slowly snap it into the gantry, very slowly! It is recommended to print with PETG for better toughness to prevent breakage during installation!
If this model is helpful to you, please consider boosting this model and following the author. More interesting models will be designed in the future, thank you very much!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)