IST Airport - Modular Airport Display
Print Profile(4)
Description
Welcome to the O_G Airport Collection – a modular 3D-printed airport display system
This model depicts a stylized version of the IST Airport / Istanbul Airport. The design is not intended as a 1:1 scale copy, but rather as a clean, decorative, and playable display model with high recognition value
What makes this system special:
The Universal Airport Base only needs to be printed once. Afterwards, different airport plates can be swapped out at any time
This way, you don't have to print a completely new base for every airport. Instead, you only print the respective Airport Plate and the matching NamePlate. This saves print time and material, and offers maximum flexibility in presentation
You can display a single airport, change the airport plate at any time, or print multiple bases to present different airports side by side
The IST Airport Plate includes a stylized terminal structure with a central terminal building, multiple terminal arms, apron area, tower, runway markings, and other airport-inspired details
🧲 Included Parts
- Universal Airport Base
- IST Airport Plate / Airport Insert
- IST NamePlate
prepared 77% version for smaller build plates, e.g., Bambu Lab A1 & similar printers
🛠️ Modular System
The system is designed so that future airport plates are compatible with the same Universal Base
Example:
- Print Universal Airport Base once
- Insert IST Airport Plate
- Insert IST NamePlate
- Later, simply swap it for another Airport Plate
This creates an expandable Airport Collection where you decide whether you want to present just one airport, multiple interchangeable airport plates, or multiple complete displays
⚙️ Print Profile
Layer height: 0.2 mm
Seam: Rear
Walls: 3
Infill: 4% Gyroid
Important:
For multi-color prints, please observe the following setting:
Purge tower → Rib wall: OFF
Otherwise, the purge tower may no longer fit on the build plate
✨ Scaling
The model can be scaled freely as desired
Important:
If you scale the model, all parts must be scaled by the exact same value
This applies to:
- Universal Airport Base
- Airport Plate / Airport Insert
- Nameplate
A separate 3MF file with 77% scaling is already prepared for smaller build plates
📏 Dimensions
- Universal Airport Base: 300mm x 315mm x 15mm outer, 284mm x 284mm x 9mm inner
- NamePlate: 59.4mm x 9.9mm x 1.98mm
DUS Aiport Plate: 281.16mm x 281.16mm x 49.94mm
❤️ Support & Feedback
If you like my design or have suggestions for improvement:
👉 Feel free to leave a like
👉 Share your prints
👉 Feedback is always welcome
👉 Leave a boost
📜 License
This is a MakerWorld exclusive model and only exists here on MakerWorld and is published under the MakerWorld Standard Digital File License
Allowed:
• Printing for personal use
• Sharing pictures of your prints
Not allowed:
• Selling the digital files
• Redistribution of the files
• Uploading modified versions to other platforms
For commercial printing rights, feel free to contact me or get a license directly from my Patreon page
📸 Share your prints!
I would be thrilled to see your finished Airport Displays 😄
Feel free to share your prints!
Happy printing!
Note on Design
This model is a stylized, self-designed interpretation of an airport display. No official logos or brand assets are used. The focus is on a clean, modular, and decorative collection/display system
IST Airport as part of the O_G Airport Collection – a modular 3D-printed airport display system. Print the Universal Base once and swap the Airport Plates at any time
Also check out my other airports:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)