Search models, users, collections, and posts
Ajin Bookmark | Hueforge Multicolor
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
0
2
0
0
0
0
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.7x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.59998mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.64mm) swap to Jade White
At layer #6 (0.72mm) swap to Red
At layer #11 (1.12mm) swap to Black
At layer #18 (1.68mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)