Air Cooler 120mm Fan Mounting Bracket
Print Profile(1)
Description
The only drawback of the AK700 air cooler is that the fan is still mounted with wire, which is too unsightly. Therefore, a fan bracket was designed specifically for the Deepcool AK700, which can be directly installed on the heatsink tower. For aesthetics, a fan protective mesh has also been added, but it will produce extra noise at high speeds. If you mind it, you can remove it during printing.
The wire clips for air coolers have industry standards, and most brands should be universal. However, it has not been tested, so please ensure the dimensions are consistent before printing and using.
The only drawback of the AK700 is that its fan is still mounted with wire, which looks quite unattractive. Therefore, a dedicated fan bracket has been designed specifically for the Deepcool AK700, allowing direct installation onto the heatsink tower. For improved aesthetics, a fan protective mesh has also been added, though it may produce additional noise at high speeds—users who mind this can simply remove it during printing.
The wire brackets for air-cool have industry standards, so most brands should be compatible. However, since they haven't been tested, ensure the dimensions match before printing and using them.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)