Mastodon Poster HueForge
Print Profile(1)
Description
A HueForge of a gig poster for Mastodon.
Here's the color swap instructions.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Turn on Arachne and turn off purge tower.
This print uses 7 unique filaments and is 154x220mm in size
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.64mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5
#de1619 PLA PolyTerra Lava Red Transmission Distance: 1
#d5c2a0 PLA+ IIID Max Tan Transmission Distance: 4
Swap Instructions:
Start with BambuLab Basic Black
At layer #11 (0.96mm) swap to BambuLab Basic Cobalt Blue
At layer #14 (1.2mm) swap to BambuLab Basic Turquoise
At layer #15 (1.28mm) swap to BambuLab Basic Indigo Purple
At layer #20 (1.68mm) swap to PolyTerra Cotton White
At layer #21 (1.76mm) swap to PolyTerra Lava Red
At layer #26 (2.16mm) swap to IIID Max Tan for the rest.
Boost Me (for free)
If you like this HueForge a Boost is appreciated!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)