Tandy 2500SX Series Floppy Drive Bezel Replacement

Summary

Replacement floppy drive bezel for Tandy 2500SX Series computers.

This part was created to replace damaged, missing, or broken original bezels commonly found on Tandy 2500SX systems. The original plastic becomes brittle with age and is frequently cracked or lost during repairs, upgrades, or storage.

The model was designed from an original bezel and tested for fit on an original Tandy 2500SX system.

Features

• Direct replacement for the original Tandy 2500SX floppy drive bezel
• Restores original appearance of the front panel
• Ideal for restoration projects
• FDM printer friendly
• Stronger than many surviving original parts
• Designed and tested on original hardware

Confirmed Compatibility
Confirmed

• Tandy 2500SX
• Tandy 2500SX/33

Possible Compatibility (Unconfirmed)

May fit other Tandy 3000 or 4000 Series systems using the same floppy drive and bezel configuration.

If you test this part on another model, please leave a comment with the results.

Print Settings

Recommend Resin Printing this with Tough 2.0 Resin

FDM Recommended Material

• ABS (recommended)
• PETG

Printer Settings

• Layer Height: 0.16–0.20 mm
• Walls: 4+
• Infill: 20–50%
• Supports: As needed for your printer
• Brim: Optional

Restoration Notes

The original bezel on this machine was damaged and reproduced using CAD and 3D printing to preserve the system's original appearance.

This model is intended for restoration and preservation of vintage Tandy hardware.