Summerween Vibes Halloween Hueforge

Celebrate the best of both worlds with the Summerween Vibes – Skeleton & Cat Pool Float design. This vibrant artwork features a skeleton rocking heart-shaped sunglasses and lounging with a cool cat on a flamingo float, all set against a bright summer sunset. Playful bats and beach balls add to the spooky-meets-tropical charm, making this piece perfect for anyone who believes Halloween fun belongs year-round. Ideal for quirky summer décor, seasonal gifts, or fans of spooky-cute art.

Project: Summerween Vibes2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm

Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#519f62 PLA Overture Matte Green Transmission Distance: 0.4
#8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
#eb3b41 PLA Overture Matte Red Transmission Distance: 2.5
#f79dbc PLA Overture Pink Transmission Distance: 3.2
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#cbc6b8 PLA BambuLab Matte Bone White Transmission Distance: 1.6
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 9 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #9 (0.8mm) swap to Ice Blue
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Pink
At layer #17 (1.44mm) swap to Pumpkin Orange
At layer #20 (1.68mm) swap to Sunflower Yellow
At layer #22 (1.84mm) swap to Bone White
At layer #24 (2mm) swap to Ivory White for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. It ties together the recurring “Summerween Vibes” theme while still leaving room for the playful ghost, witchy, and squad designs included in the set. Mix and match panels for a seamless look across your shelves, or gallery wall this spooky season!

🎃👻🌞 Hueforge: Spooky Summerween Collection 🌊🕷🦇

Want to sell your physical prints or access to the entire collection? A commercial and full access license is available through my profile.