Strike Plate (Customizable)

I wanted a custom strike plate for an outside door that I have that was marking up the door frame because of how it was installed. It had to be longer than standard with a custom spacer. I did find some strike plates already on Thingiverse, but was having trouble making the modifications to them that I wanted and coming up with a good result, so I decided to just make my own parametric version where I could easily tweak the dimensions.

I have included two STL files. One should be standard dimensions, the other was the one I made for my own unique circumstance, so it is probably useless to anyone else. It is mainly included as an example of some things you can do by changing parameters.

I have also included support for Makerworld's customizer if you want to make your own customized plate.

If this design was useful to you, consider a tip or post a make!

Print instructions

Print Settings

Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: No
Supports: No
Resolution: 0.2
Infill: 25% Gyroid
Filament: Overture PLA Black
Notes:

Print settings/material above are what I used, but most of it isn't too important. I'm also not even sure this PLA will last in this application, but if it doesn't, I'll get different material and print another. It seems good at the moment, I'll see what happens over time.

If you found this model useful, please post a make or show your support with a boost!