CustomFit Parametric Storage Box with Slip-On Lid

CustomFit Storage Box with Slip-On Lid

A clean, fully customizable storage box for small parts, desk items, craft supplies, screws, electronics bits, and everyday workshop clutter. The model is parametric, so you can adjust the box width, depth, height, wall thickness, corner radius, lid clearance, lid height, divider count, and optional lid label before printing.

The lid is designed as a simple slip-on/friction-fit cover, with its size linked to the box dimensions so it updates automatically when you change the box size. Internal dividers can be enabled for sorting smaller items, or disabled for one open compartment.

Features

• Fully parametric OpenSCAD model
• Custom box width, depth, and height
• Adjustable wall thickness and floor thickness
• Slip-on removable lid with configurable clearance
• Optional internal dividers
• Optional custom label text on the lid
• Rounded corners for a cleaner look
• Designed for FDM printing
• No supports required for the box
• Lid can be printed flat for best results

Printing notes
Print the box upright. For the lid, check the orientation in your slicer; printing it flat-side down usually gives the cleanest result. Default clearance is set for a typical tuned Bambu printer, but you can increase lid_clearance slightly if you prefer a looser fit or are using a material with more shrinkage.

Resize using the parametric controls rather than scaling only one STL part in the slicer. That keeps the lid and box matched correctly.