Spice Rack "Spices & Baking"
Print Profile(1)
Description
Spice Rack with Wall Mount
This is a small spice rack or also for baked goods, which can be attached either with double-sided adhesive tape to the inside of doors, or with screws to the door.
The dimensions of the spice rack: 232mm x 170 mm x 35 mm
For screwing, two elongated holes with a diameter of 4 mm are provided on the back panel. The drilling distance is 160mm.
The model requires no support structures !
There are two versions of the model:
A model with the inscription "Spices & Baking"
A model without inscription, to be able to customize the model individually in the slicer !
Spice Rack with Inscription
Spice Rack without Inscription
Backside of the Spice Rack
Print Information - Print Settings with PLA - Basic:
- The filament I used is PLA Basic from Bambu Lab.
- For the build plates, I used the Smooth - PEI Plate / High Temp Plate, without adhesive.
Spice Rack without Text
Layer Height
Layer Height: 0.16 mm
First layer height: 0.2 mm
Walls
Wall lines: 2
Detect thin walls: Yes
Wall Generator
Wall Generator: Arachne
Threshold angle for wall transition: 10°
Filter for wall transition size: 25%
Wall transition length: 100%
Number of wall distributions: 1
Minimum wall width: 85%
Minimum feature size: 25%
Infill
Infill: 15%
Multi-line infill: 1
Infill pattern: GYROID
Infill anchor length: 400%
Maximum infill anchor length: 20
Filter out small gaps: 0 mm
Spice Rack with Text
Layer Height
Layer Height: 0.16 mm
First layer height: 0.2 mm
Walls
Wall lines: 2
Detect thin walls: Yes
Wall Generator
Wall Generator: Arachne
Threshold angle for wall transition: 10°
Filter for wall transition size: 25%
Wall transition length: 100%
Number of wall distributions: 1
Minimum wall width: 85%
Minimum feature size: 25%
Infill
Infill: 15%
Multi-line infill: 1
Infill pattern: GYROID
Infill anchor length: 400%
Maximum infill anchor length: 20
Filter out small gaps: 0 mm
These parameters have been adjusted for this part(s) in the print profile. All other
values remain Standard !
Have fun printing !
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)