Drain tray for Miele washing machine lint filter
Print Profile(1)
Description
A drip tray for Miele washing machines.
Ideal for cleaning the lint filter / pump on the washing machine.
The manufacturer should actually supply something like this.
Maximum tray size (height from bottom to bottom edge of the lid 4.7cm
Slightly recessed at the front (19cm wide, corresponding to the flap size)
The tray is slightly higher on the other sides to prevent spillage when carrying.
Simple, fast print
Filament doesn't matter, I used old PLA.
On the X1C, the part fills the entire print bed to the last millimeter.
It is said to be able to print even wider, but there are some reserved areas at the front.
If your printer cannot do this, please write to me with the maximum dimensions, and I will gladly adapt it.
The front-to-back direction can be scaled without problems.
Do not scale the left-to-right direction, as this changes the size of the recess and it will no longer fit under the lid.
Tip: some residual water always remains in the lid. You can slightly lift the lid knob, and the remaining water will also drain out.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)