TheFixer3D

cover

20260607_125426.jpg

20260607_125440.jpg

20260607_125430.jpg

plate_1.png

77a07d9ca8e98101.jpg

0.24mm layer, 6 walls, 40% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>[DE] Beschreibung</h3>Mit diesem Projekt kannst du dein manuelles Rollo ganz einfach auf Elektro-Antrieb umrüsten! Das Gehäuse ist kompakt, stabil und passgenau für den extrem kraftvollen JGY-370 Schneckenrad-Motor konstruiert. Über einen 6-poligen Wippschalter lässt sich das Rollo kinderleicht hoch- und runterfahren. Perfekt für das Smart Home auf Budget-Basis!<h3>[EN] Description</h3>Upgrade your manual roller blinds to motorized ones! This compact and sturdy enclosure is custom-designed for the high-torque JGY-370 worm gear motor. Using a 6-pin rocker switch, you can easily control the blind to go up and down. A great, budget-friendly DIY project!&nbsp;<h2>Bill of Materials (BOM) / Benötigte Teile</h2><ul><li>Motor: 1x JGY-370 Worm Gear Motor (12V, ca. 30 RPM recommended)</li><li>Power Supply / Netzteil: 12V 5A DC (5.5x2.1mm)</li><li>Switch / Schalter: 1x 6-Pin Rocker Switch (DPDT / Polwendeschalter)</li><li>Screws / Schrauben: 4x M3 (approx. 6-8mm) or BT3x8 self-tapping screws for the enclosure</li><li>Wire / Kabel: Flexible Stranded Wire / Zwillingslitze (0.75 mm² / AWG 18)</li></ul><h2>Wiring / Verkabelung (Polwendung)</h2>[DE] Um den Motor vorwärts und rückwärts laufen zu lassen, musst du die äußeren Pins des Schalters über Kreuz verlöten (X-Schaltung). Schließe das 12V-Netzteil an die beiden mittleren Pins an. Nutze unbedingt 0.75 mm² (AWG 18) Kabel, da das Netzteil bis zu 5A liefern kann! Isoliere die Lötstellen mit Schrumpfschlauch.[EN] To reverse the motor direction, solder the outer pins of the switch crosswise (X-configuration). Connect the 12V power supply to the two middle pins. Make sure to use 0.75 mm² (AWG 18) wires, as the power supply can deliver up to 5A! Protect the soldered joints with heat shrink tubing.&nbsp;If you like this design, please leave a ⭐⭐⭐⭐⭐ review and post your makes! Happy printing!

<h3>[DE] Description</h3>With this project, you can easily convert your manual roller blind to an electric drive! The enclosure is compact, stable, and precisely designed for the extremely powerful JGY-370 worm gear motor. A 6-pin rocker switch makes it easy to move the roller blind up and down. Perfect for a budget-friendly smart home!<h3>[EN] Description</h3>Upgrade your manual roller blinds to motorized ones! This compact and sturdy enclosure is custom-designed for the high-torque JGY-370 worm gear motor. Using a 6-pin rocker switch, you can easily control the blind to go up and down. A great, budget-friendly DIY project!&nbsp;<h2>Bill of Materials (BOM) / Required Parts</h2><ul><li>Motor: 1x JGY-370 Worm Gear Motor (12V, approx. 30 RPM recommended)</li><li>Power Supply: 12V 5A DC (5.5x2.1mm)</li><li>Switch: 1x 6-Pin Rocker Switch (DPDT / Polarity Reversing Switch)</li><li>Screws: 4x M3 (approx. 6-8mm) or BT3x8 self-tapping screws for the enclosure</li><li>Wire: Flexible Stranded Wire / Twin Wire (0.75 mm² / AWG 18)</li></ul><h2>Wiring / Polarity Reversal</h2>[DE] To make the motor run forwards and backwards, you need to solder the outer pins of the switch crosswise (X-connection). Connect the 12V power supply to the two middle pins. Make sure to use 0.75 mm² (AWG 18) wires, as the power supply can deliver up to 5A! Insulate the solder joints with heat shrink tubing.[EN] To reverse the motor direction, solder the outer pins of the switch crosswise (X-configuration). Connect the 12V power supply to the two middle pins. Make sure to use 0.75 mm² (AWG 18) wires, as the power supply can deliver up to 5A! Protect the soldered joints with heat shrink tubing.&nbsp;If you like this design, please leave a ⭐⭐⭐⭐⭐ review and post your makes! Happy printing!

Print Profile(1)

Bill of Materials

Description

[DE] Description

[EN] Description

Bill of Materials (BOM) / Required Parts

Wiring / Polarity Reversal

Comment & Rating (0)

License

Related Models

Electric Roller Shutter Belt Winder