Print Profile(3)
Description
About this model
All sizes can be combined
(matching wall mount without drilling) https://makerworld.com/en/models/2902140-wandbefestigung-fur-skadis#profileId-3244371
Own Design – completely designed by me with 3D Builder and optimized for fast, reliable printing on the Bambu Lab A1 Mini
The characteristic pattern on the front is created by the chosen print settings and gives the plate a special look without unnecessarily increasing print time
Print Settings
Tested on: Bambu Lab A1 Mini
Profile: 0.28 mm Extra Draft
Quality
- Layer Height: 0.28 mm
- First Layer: 0.20 mm
Line Width
- Standard: 0.42 mm
- First Layer: 0.50 mm
- Outer Wall: 0.42 mm
- Inner Wall: 0.45 mm
- Surface: 0.45 mm
Walls
- Wall Lines: 2
Top/Bottom Layers
- Surface Pattern: Octagram Spiral
- Top Shell Layers: 1
- Top Color Layers: 1
- Dense Top Layer: 50 %
- Bottom Shell Layers: 1
- Bottom Color Layers: 1
- Dense Bottom Layer: 50 %
Infill
- Infill Density: 15 %
- Infill Pattern: Grid
- Infill/Wall Overlap: 15 %
Slicer Result
- Filament Consumption: 17.74 m
- Material Consumption: 52.92 g
- Estimated Print Time: 1 hour 23 minutes
- Total Time including Preparation: 1 hour 30 minutes
- Material Cost: approx. €1.06
Features
✔ Own Design from 3D Builder
✔ No Support Required
✔ Fast Print
✔ Filament-Saving Design
✔ Modular Grid System for Numerous Applications
✔ Eye-catching Surface Structure on the Front
✔ Ideal for Workshop, Office, Gaming Setup, or Individual DIY Projects
Happy Printing!
If you like the model, I would appreciate a like, a review, and pictures of your printed version. Your feedback helps further improve future designs 🚀
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)