Sura Metin2 – “Shelf Sitter”

⚔️ Sura Metin2 – “Shelf Sitter”

Bring a piece of nostalgia from the legendary world of Metin2 right to your gaming setup! This figure of the iconic Sura character is designed to sit perfectly on the edge of your monitor, shelf, desk, or anywhere else you can imagine. 🖥️✨

A must-have companion for every fan of the game who wants their warrior right by their side.

💡 Pro-tip for stability:

The figure sits quite well on its own, but for "iron-clad" stability, I recommend applying a small piece of double-sided tape underneath. This ensures your Sura stays put, even if you bump your desk! 😉

⚙️ Recommended Print Settings:

To achieve the best level of detail, I recommend the following configuration:

• Material: Looks best in Matte Grey PLA.
• Nozzle: 0.2 mm (for crisp, fine details).
• Layer Height: 0.10 mm (Standard).
• Seam Position: Nearest.
• Wall Loops: 4.
• Infill: 10% (Gyroid pattern for structural integrity).
• Top Shell Layers: 4.
• Supports: Tree Supports.
  • Top Z distance: 0.16 mm.
  • Support branch spacing: 2.5 to 3.5 (adjust to your preference).

🛠️ Additional Notes:

The model is fully scalable! You can also try printing it with a standard 0.4 mm nozzle, though please keep in mind that you might see a slight reduction in fine detail quality compared to the 0.2 mm setting.

I can't wait to see your prints! Please share a photo of your Sura in your setup in the comments section! 📸🔥