Rosary Holder

Religious Rosary Holder (Please read until the end)

📌 Usage License

This model is free for sale, no commercial license required. In return, I only ask that you follow me here on MakerWorld and, if you like the model, leave a like and a review. Your support helps me continue creating and making new models available for free to the community.

⚠️ Important notes about printing

This model was created and optimized by me after extensive testing. I tried using several models available here and wasted a lot of material due to issues, especially in the chin area. Therefore, I developed my own version, which yielded a much better result in that specific area.

The chin part is not yet perfect, but in my experience, this is one of the versions with the fewest problems among those I have tested.

After printing: IMPORTANT TIPS!!!!!

* Remove the supports very carefully, especially in the chin area.
* There might be a small excess of material in this area. Remove it with pliers, making light, slow cuts.
* If desired, perform only a very light sanding to improve the finish and then remove the dust.
* There are some small wisps along the model. Cut them carefully with pliers.
* Do not sand other parts of the model and do not force excessive finishing, as this may damage it.