Benelli TRK 702X SUPPORTO NAVIGATORE CARPLAY
Print Profile(1)
Description
This support allows for the installation of carplay on the Benelli TRK 702x
it is essential to print with ABS filament or stronger materials so that the brackets do not deform with sun exposure.
For assembly, 2 M5 screws with corresponding 12mm nuts and two M6 screws will be sufficient to connect the side brackets to the central tube.
the holes on the central tube will need to be threaded with an M6 tap.
In some cases, it will be necessary to replace the screws holding the windshield with 2 screws 5mm longer than the original.
if you liked the project, you can give a boost.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)