Artemis Snowpeak SPA PP750 Picatinny Top Rail
Print Profile(1)
Description
A simple picatinny rail to mount on top of the PP750, to use instead of the factory dovetail rail. It has a cutout for a standard magazine and for gripping the side lever. The height of the magazine cutout is 28mm. On request I can make a higher rail with a higher cutout.
It is secured to the block with two m3x10mm screws.
The intended print orientation is included in the model. I would recommend a brim to make sure it stays on the build plate. It is a tall narrow print, so it might be somewhat challenging for some printers. You should also be able to print it laying flat and upside down.
Perimeters: at least 4
Infill: at least 30% (higher is better)
Supports: not necessary
Let me know if there is anything wrong, or if you have any questions.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)