咖哩

cover

10mm*2mm磁鐵,22層暫停,0.12mm層高, 無支撐,2 層牆, 10% 填充

10mm*2mm magnets, 22nd layer pause, 0.12mm layer height, no supports, 2 walls, 10% infill

增加磁鐵，使用10mm*2mm磁鐵，在22層增加打印暫停放入磁鐵,0.12mm層高, 2 層牆, 10% 填充

Add magnets, use 10mm*2mm magnets, add a print pause at layer 22 to insert the magnets, 0.12mm layer height, 2 walls, 10% infill