Random Grid Selector - Heat: Pedal to the Metal

🔥🏎️The randomize tool that you need for Heat: Pedal to the Metal 🏎️🔥

English:

Tired of arguing over who gets the pole position? This Random Grid Selector is the perfect companion for your Heat: Pedal to the Metal board game!  

Before starting the race, simply shake the box to mix the spheres inside, tilt it, and let them fall randomly into the slots numbered from 1 to 12. It instantly and fairly decides who starts first, who goes last, and the exact position of every single car on the grid.  

• Supports Up to 12 Cars: Numbered slots from 1 to 12 make it perfect for the base game and the expansions, adding full grids of AI Legends.  

   

• Support-Free Design: The top part of the box has been specifically designed with an open top. This opening prevents the need for any support structures, saving you both printing time and filament clean-up.

   

• Fast & Easy Print: An optimized, functional design that prints very quickly, uses minimal filament, and is completely ready to print right off the bed.

   

• Color Customization: The spheres are 9x9mm. Since I didn't have other colored filaments, I simply painted them using acrylic paint markers. However, if you have different filament colors available, you can easily print them directly in the corresponding car colors.  

Spanish:

Tired of arguing over who gets the pole position? This Random Selector is the ultimate accessory for your games of the Heat: Pedal to the Metal board game.  

Before starting the race, simply shake the box to mix the spheres inside, tilt it, and let them fall randomly into the compartments numbered from 1 to 12.  

• Up to 12 Players or Bots: With slots from 1 to 12, it is ideal for both the base game and expansions (like Heavy Rain) and for filling the rest of the grid with Legends (the automated cars).  

   

• Support-free design: I designed the box with an open top on purpose to completely avoid the use of supports. This saves you printing time and filament, avoiding having to remove difficult structures.

   

• Fast and easy printing: An optimized and functional design that prints in a very short time, consumes the minimum possible filament, and comes off the bed ready to be used.
•  
• Color Customization: The spheres are 9x9mm. Since I didn't have other colored filaments on hand, I painted them with acrylic markers. If you have different colored filaments, you can print them directly with the car colors for a cleaner finish.