Customizable Mirror Phone Holder

Keep your smartphone within easy view while getting ready in the morning. 
This holder is designed to hang from a bathroom mirror, making it perfect for watching videos while shaving, brushing your teeth, or completing your daily routine.

The phone frame is designed to fit most smartphones currently on the market. If you encounter compatibility issues with a specific device, feel free to leave a comment and I'll look into it.
 

Using MakerWorld's Parametric Model Maker, you can customize the hanger height and the mirror thickness.

The included print profile is configured for a hanger height of 200 mm and a mirror thickness of 20 mm. These dimensions are close to the maximum plate limit of an A1 Mini, but they can be increased significantly when using larger printers.

Assembly

The assembly should be fairly self-explanatory from the photos.

My only reccomandation is to adjust the upper hook of the phone frame, to match the width of the smartphone you intend to use, before tightening the four screws.

To insert or remove the phone, slide it sideways into or out of the frame rather than pushing it in from the front.

Printing a custom hanger

If you need to customize the hanger, do it in the Online editor and export the stl.
Then open the regular print profile, import the stl of the customized hanger and replace the one already included in the print profile, with it. I suggest to position it the same way, sideways and without supports.