Body Mount for Body 6230
Print Profile(1)
Description
Body Mount for Body 6230 (SCY16103) on the SG116 Beast (SCY16101)
Unfortunately, the original body mount is not compatible with the 6230 body (SCY16103). The body uses a hole spacing of 45 mm instead of the standard 41.5 mm found on the SG116 Beast (SCY16101).
This mount was specifically designed to solve that issue and allow the 6230 body to be installed on the SG116 Beast using the original mounting hardware.
Installation Notes
Depending on your printer's accuracy and print settings, the holes may need slight post-processing with a hand drill. They were intentionally designed with minimal clearance for a secure fit.
Before enlarging the holes, try installing the original screws directly into the printed part. On my print, this worked perfectly and the screws cut their own threads into the plastic.
The mount is also compatible with slightly larger body clips than the original ones.
Print Settings
- Layer Height: 0.16 mm (High Quality)
- Wall Loops: 4
- Infill: 100%
- Supports: Required (Normal)
- Tip: Remove any support residue around the holes with a hobby knife or cutter after printing.
- Material: PLA
- Recommended Material: PETG for increased durability and impact resistance
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)