Self-watering Pot Venom Leaf (New)

# 🌿 Alocasia Venom (New) Self-Watering Pot Set – S, M, L & XL

This set has been specially designed so that the pots **do not need to be scaled**

Anyone who has ever scaled decorative plant pots with intricate leaf motifs knows the problem: wall thicknesses change, details become unclean, and the design loses its effect. That's why you get four separately adapted sizes here, each specifically optimized for its size

Each pot features a plastically elaborated **Alocasia Venom leaf** in a new design, which stands out particularly well with single-color prints and gives the pots their characteristic look

---

# 💧 Self-Watering System

All sizes have been designed for use as a self-watering pot

The actual plant pot sits in the upper section. Below it is a separate water reservoir

Via a capillary wick, which is guided through the bottom openings of the orchid or aroid pot, the plant can independently absorb water from the reservoir. This ensures a consistent water supply and significantly extends watering intervals

For all sizes, care has been taken to ensure that the inner pots can be easily removed from above, without having to maneuver inside the pot

---

# 👀 Viewing Window (Optional)

On the back there is a viewing window, through which water level and root development can be conveniently checked without having to remove the inner pot

The viewing window is designed as an optional negative and can be activated or deactivated in Bambu Studio as needed

### With Viewing Window

✅ Water level control

✅ Root development control

✅ Ideal for orchids, alocasias, and other aroid plants

### Without Viewing Window

✅ Closed outer wall

✅ Use as decoration

✅ Use as a vase

✅ Use as a pen holder

✅ Use as a general storage container

---

# 📏 Sizes

## Size S

* Suitable for a clear orchid pot with **6 cm diameter**

* Water reservoir: **100 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size M

* Suitable for a clear orchid pot with **7.6 cm diameter**

* Water reservoir: **200 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size L

* Suitable for a clear orchid pot with **9 cm diameter**

* Water reservoir: **400 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Ideal for larger plants with higher water requirements

---

## Size XL

* Suitable for a **10 cm aroid pot**

* The aroid pot is deeper and intentionally extends slightly beyond the top edge

* This allows for particularly convenient removal of the inner pot

* Water reservoir: **500 ml plastic cup**

* Capillary wick can be easily guided through the aroid pot

---

# ⚠️ Important Note

The print files contain only the decorative outer pots

The following components are **not part of the STL files**:

* Orchid pots

* Aroid pots

* Plastic cups for the water reservoirs

* Capillary wick

These components must be acquired separately

The required orchid pots, aroid pots, plastic cups, and capillary wicks are readily available from the big A

The outer pots serve as a decorative casing and transform simple planters into a visually appealing self-watering system

---

# 🖨️ Print Notes

* No scaling required

* Each size has been separately adapted

* Optimized wall thicknesses for each size

* Optimized leaf details for each size

* Suitable for PLA, PLA+, PETG, and comparable materials

* For optimal results, a fine layer height is recommended

---

# 📜 License

These files are intended exclusively for private use

Not permitted are:

❌ Sale of digital files

❌ Distribution of digital files

❌ Spreading of files on other platforms

❌ Sale of printed copies

❌ Commercial use of any kind

By downloading, you agree to these terms

# 📜 License

A commercial license can be acquired through MakerWorld as part of a commercial membership

# 📜 License

---

# ❤️ Support

If you like my models, I would be very happy about a like, a make, or a photo of your print

It is particularly nice to see which plants have found a new home in the pots

If you share your prints on social media, I would be thrilled about a tag:

📸 **Instagram: @marbledjungle**

🎵 **TikTok: @marbledjungle**

Thank you very much for your support and happy printing! 🌿