Elegant Hollow Design Standing Cat Sculpture

Elegant Hollow Design Standing Cat Sculpture

The open design allows light to pass through, casting beautiful architectural shadows

Elevate your space with this stunning piece of 3D art! This standing cat sculpture stands out due to its unique, hollow-body framework and sweeping, organic lines. It perfectly blends artistic minimalism with the graceful, alert silhouette of a cat.

Thanks to the hollow design, it uses less filament and prints efficiently, yet remains a massive, eye-catching centerpiece. 

14 cm high & 15 cm long

Check out my Elegant Hollow Design Models!:

Elegant Hollow Design Cat Sculpture

Elegant Hollow Design Dachshund Sculpture

Please read before printing:

This model features fine details and delicate structures.
Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion.
Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated.
Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set.
For more tips on this topic, check out this video on YouTube. video (Youtube).

Print Recommendation:

I recommend printing this Models with the orignal intendet Print Profil: [original] hiddem seams, optimised settings.
This includes a layer height of 0.12 mm and hidden seams. 

Additional supports have been added to minimalize the risk of print errors.

I recommend PLA Basic Dark Grey or PLA Matte Bonewhite and the settings in my print profil for a high quality print.

Support Structures:

Be careful when removing the support structures to avoid breaking it.

The Design and my Print Profil is designed with minimal but necessary supports.

Assemble:

For assembly, I recommend using PLA glue or plastic glue, preferably a fast-drying one.
I personally use German super glue. It dries within a few seconds and creates a very strong bond.

I recommend performing a dry fit before gluing, as the dog offers very little surface area for gripping and the parts have off-center weights.

Apply adhesive and align the two parts with each other.

If you feel somewhat unsure, you can use the alignment guide/rail. Take the two parts as shown in the image and slide it into place, press against the alignment guide from below with your thumb and just hold (Blue Arrow) under the tail from above with your finger. Use the thumb and finger of your other hand on the legs of the sculpture to align the two halves.

Check out my other Models!

Have fun printing!