Ares - God of War - Gods & Legends
Print Profile(1)
Description
Boost Me (for free)
If Ares has taken his place in your Olympus, leave a 👍 and Boost 🚀 the project, it's the best way to support Gods & Legends and continue the series.
Five Greek gods published, two active pantheons. Who do you want to see on the print plate? Write it in the comments. ⚔️
Athena wins wars with strategy. Ares starts them.
Ares, god of war, combat, and martial violence, the most feared among the gods on the battlefield, enters the Greek series of Gods & Legends with an original figurine that is the direct counterpart to Athena: where she brings wisdom and order, he brings chaos and brute force. ⚔️
The Corinthian helmet with curved side horns immediately distinguishes him from Athena and introduces an element of visual aggression that reflects the character's nature. 💪
In his right hand he wields a three-pronged spear. In his left hand he holds the visually dominant piece of the model: a large round shield with a roaring lion sculpted in high relief at the center, surrounded by concentric rings with engraved decorations, a symbol of ferocity and royalty on the battlefield. ✨
The base tells the story without words: not broken columns like for Athena, not clouds like for Zeus, not waves like for Poseidon, but a battlefield with bones and debris scattered on the ground, the remains of those who crossed his path. The Greek meander band closes the composition with the visual coherence of the series. 🏛️
Gods & Legends Greek series: Poseidon, Hades, Zeus, Athena, and now Ares. Olympus is complete. 🎲
🔹 Compatibility
- 🖨️ Compatible Printers: Bambu Lab Series
- 🔩 Nozzle tested: 0.4 mm
- 🧩 Modular system: none
🔹 Technical Specifications
- 📐 Dimensions: 72.4 × 68.1 × 120.2 mm
- 🎨 Material tested: PLA
- 📏 Layer height: 0.16 mm
- 🔲 Infill: 15%
- 🧱 Wall thickness: 2 perimeters
- 🔝 Top/bottom layers: 6 top / 4 bottom
- 🏗️ Supports: Yes — automatic organic tree
🔹 Print Tips
- ✅ The included profile has been tested and validated: start printing without modifications for optimal results.
- 💡 The wall generator Arachne is active: it precisely manages the relief lion on the shield, the helmet horns, the three-pronged spearhead, and the bone details at the base.
- ✅ The lion on the shield is the most elaborate detail of the model: with 0.16 mm layers, the mane, muzzle, and concentric decorations appear sharp directly in print.
- 🩼Support removal is relatively simple throughout the figure. The points requiring more patience are: under the helmet horns and between the helmet and torso. There are no risks of involuntary breakage, but a little patience is required to remove them from these two narrow print spaces.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)