SC3D

cover

P1H Pic 3.png

P1H Tag Pic 1.jpeg

P1H Tag Pic 2.jpeg

P1H Tag Pic 4.png

P1H Tag Pic 5.jpeg

plate_1.png

printprofile.png

Print Settings: <ul><li>0.16mm layer height · 15% infill · No supports required</li></ul>Special Settings<ul><li>Fill multiline set to 2 for added part strength</li><li>Wall generator set to Arachne for precise, clean outer walls</li></ul>Notes: Model is split into separate parts for multi-color printing — AMS required. Parts are designed to print in place and are too small for manual assembly. Swap colors per part for best results.

0.16mm layer, 2 walls, 15% infill

Fan-made double-sided keychain inspired by P1Harmony, designed in Shapr3D for a clean two-color print. Measures 86 × 28 × 3 mm — slim and pocket-friendly. White PLA base with red logo layer but each item is broken out into parts and color can be customized. No supports needed. Perfect gift for any P1ece.

P1Harmony fan keychain - double-sided logo tag

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models