Search models, users, collections, and posts
1957 Mercedes Gullwing
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
4 h
1 plate
Open in Bambu Studio
Boost
3
0
0
0
6
0
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 220x178.31mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
#a6a9aa PLA BambuLab Basic Silver Transmission Distance: 0.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Dark Gray
At layer #17 (1.44mm) swap to Silver
At layer #24 (2mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)