Fox DHX2 Shock 1:1 Replica - Free 3D Print Model

Search models, users, collections, and posts

Spec

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

H2S

P1P

X1 Carbon

H2C

A2L

H2D Pro

H2D

P2S

X1E

P1S

A1 mini

X2D

0.2mm layer, 2 walls, 15% infill

Designer

10.3 h

4 plates

5.0(3)

Open in Bambu Studio

Boost

400

638

156

111

Released

Description

A 1:1 replica of the Fox DHX2 shock. The decals are made with double sided tape and I printed them out. (As shown below) If you make the spring on it 100 percent infill the spring wont break as easily and will compress all the way. If you have any suggestions or ideas just reach out and I will see if I can do it. (You can download the png here if you cant download the picture below

https://drive.google.com/file/d/17rn2BydMXvelRir3nPvCsSfusovDQ1Ye/view?usp=sharingInstructions are BELOW…

Boost Me (for free)

Pre-assembly:

Some parts may need sanding/filing before assembly to ensure a perfect fit.

Tools:

Glue

sandpaper/small file

Assembly guide:

Screw these two pieces together. (The farther you screw it the longer it will be)
(As shown below)
2. Now put the flat part of that piece into the top piece (Use glue)
(As shown below)
3. Now insert the spring into the bottom of those pieces
(As shown below)
4. Now insert the bottom piece through the bottom of the spring
(As shown below)
Enjoy your Fox DHX2 1:1 replica!
Instrucions idea from https://makerworld.com/en/@bsilco

Comment & Rating (53)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.