TP-Link Deco XE75 Wall Mount
Print Profile(1)
Description
Liked a model I printed however it didn't take into account the new Deco design (and was also too large) so I made this one from scratch. Measured so that the power plug has the exact clearance needed to plug in facing forward. You may need to use a 90° adapter to screw it in, but you can also just drill out a hole in the front if you need to use a long straight screwdriver/drill. This mount lets the Deco sit snug not only on the outer edges but the inner piece is upraised so that it supports the center of the device as well and holds it in place.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)