Wall art Ho Oh

Transform your space with this sleek wall art silhouette, designed to be printed flat in just 3 layers for a fast, clean result. Stick it on any wall for an instant touch of personality : perfect for bedrooms, living rooms, offices, or gifts.

It prints as a thin, flat piece (0.6mm / 3 layers at 0.2mm layer height) that looks sharp and holds up well on the wall. Black PLA gives the best contrast against light walls, but feel free to experiment with colors.

A few tips from my own prints:

• Let the plate cool down completely before removing the piece. These thin prints stick well to the bed and forcing them off while warm can warp or snap delicate parts.
• I personally use the PEI textured plate which gives a nice finish on the bottom side and releases cleanly once cooled.
• Use a bit of poster putty or (my recommendation) double-sided tape to stick it on the wall.
• Beware of my models with disconnected pieces. This will print fine but will be trickier to stick on the wall, you may need to place small pieces individually at the right spot. I tend to avoid making them though !
• You can scale the model freely in X/Y to change the size, but keep Z unchanged to maintain the 3-layer flat profile. You can increase Z to make it thicker, but I wouldn't recommend going thinner.

The 3MF file comes pre-configured with Bambu Lab A1 settings but works with any printer. An STL is also included if you prefer to slice it yourself.

Check out my profile for more wall art silhouettes ! I regularly upload new designs across anime, gaming, sports, animals, and more. If there is a silhouette you would like to see, feel free to leave a comment!