Print Profile(1)
Description
Boost Me (for free)
Give this turtle a boost — he’s not exactly built for speed :D
A smooth, modern sea turtle sculpture with flowing fins and a clean minimalist shape. Designed as an elegant ocean-inspired decor piece that looks great on a shelf, desk, or coastal-themed display.
Current Size
Height: ~ 8.7cm (3.4")
Width: ~ 9cm (3.5")
Length: ~ 15cm (5.9")
Filament used
White - Regular PLA - Elegoo
Printing
- Current height can be resized.
- Use a clean print plate with some glue (unless you are using a super tack plate)
- Use dried out filament.
- Support is needed. Please keep the positioning and the support settings as is as the settings have been adjusted to minimize scaring and proper printing.
Support Removal
- Under the flippers - bend upward or downwards
- For the pointy end of the “flipper corners” gently wiggle a little bit and pull the support downwards following the direction of the flipper.
- “Tail” gently wiggle a little bit and pull the support downwards following the direction of the tail.
Clean Up
Some gentle sanding and careful heating may be needed, depending on how picky you are. The scarring should be minimal after support removal, but since the seam follows the outer edges, it may leave a few tiny bumps.
If you like this design, please leave a rating, a comment, or a boost.
Boost Me (for free)
Send a boost and make this turtle feel turtley awesome ;)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)