ilRox.3D

cover

1000122452.jpg

1000122451.jpg

1000122454.jpg

1000122453.jpg

plate_1.png

plate_2.png

19a0645fa0375e66.png

Compatible with X1, P1S, P2S + AMSDettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO X1 SERIES + AMS - 0,12 mm layer, 2 walls, 10% infill

19a0645fa0375e66.webp

COMPATIBILE CON A1 + AMS Lite&nbsp;Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2.50hr.2 Walls, 15% infill, total weight approximately 28gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO A1 + AMS Lite - layer 0,12 mm, 2 walls, 15% infill

COMPATIBILE CON X2D + AMS Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO X2D + AMS - 0.12mm layer, 2 walls, 10% infill

COMPATIBILE CON H2S + AMS Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO H2S + AMS - 0.12mm layer, 2 walls, 10% infill

COMPATIBILE CON H2D e H2C + AMS Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 15% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO H2D + AMS - 0.12mm layer, 2 walls, 15% infill

plate_3.png

COMPATIBILE CON A1 MINI + AMS Lite Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO A1 MINI + AMS - layer 0,12 mm, 2 walls, 15% infill

COMPATIBLE WITH P2S + AMS&nbsp;Dettagli di stampa:A 0.12 mm print profile ensures fast and precise results.Duration approximately 2hr.2 Walls, 10% infill, total weight approximately 23gr.Design optimized for printing on the fewest possible plates, and with the minimum amount of support required, note that some parts need gluing.

PROFILO P2S + AMS - 0.12mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Ultimamente sono stati avvistati degli strani membri dell&#39;equipaggio, dotati di tute speciali… sembrano come provenire da altri Universi…&nbsp;<figure class="image image_resized" style="width: 48.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002893414/design/bece70bc3d361869.png"></figure>lo hanno costriuto per piegare le cose… lui ha deciso di fare altro… questo lo rende molto sospetto…  è il membro del crew di Amoung Us in versione BENDER!!!  Suddiviso in quattro colori, con parti che si incastrano perfettamente (alcune parti necessitano di un po&#39; di colla per rimanere al loro posto). Progettato per una stampa facile e veloce, il modello è ottimizzato per tutte le stampanti 3D Bambu Lab. I pezzi sono sagomati per un assemblaggio intuitivo e rapido, rendendolo ideale anche per i bambini.&nbsp;!!IMPORTANTE!!!Non hai tutti colori necessari per stampare questo modello? …ne sei sicuro? prova a dare un occhiata a questo progetto, grazie al quale potrai realizzare dei nuovi colori a partire da quelli in tuo possesso! ti basterà verificare quanto filamento ti serve in termini di grammi per stampare una determinata parte e poi procedere a realizzare il nuovo colore nella quantità necessaria, sul serio questa idea (che non è mia) è geniale, grazie <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@jetpad">jetpad</a> ! <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497">https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497</a>&nbsp;Il design include:<ul style="list-style-type: disc"><li>Parte superiore: il corpo principale del personaggio, incluso casco e visiera.</li><li>Parte inferiore: le gambe del personaggio, la parte interna sanguinolenta, entrambe progettate per incastrarsi saldamente nel corpo superiore.</li><li>Struttura interna: si adatta perfettamente alla parte interna, aggiungendo un dettaglio divertente e riconoscibile.</li><li>Dettagli unici: che fanno subito intuire da quale universo arriva!</li></ul>Questo modello è anche ideale come decorazione da scrivania, aggiungendo un tocco giocoso accanto al tuo PC o postazione di lavoro. Le sue dimensioni compatte lo rendono adatto a qualsiasi spazio… stampali tutti!&nbsp;&nbsp;&nbsp;&nbsp;

Recently, strange crewmates, equipped with special suits, have been sighted… they seem to come from other Universes…&nbsp;<figure class="image image_resized" style="width: 48.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002893414/design/bece70bc3d361869.png"></figure>they built him to bend things… he decided to do something else… this makes him very suspicious… it's the Amoung Us crewmate in BENDER version!!! Divided into four colors, with perfectly interlocking parts (some parts require a bit of glue to stay in place). Designed for easy and fast printing, the model is optimized for all Bambu Lab 3D printers. The pieces are shaped for intuitive and rapid assembly, making it ideal even for children.&nbsp;!!IMPORTANT!!!Don't you have all the necessary colors to print this model? …are you sure? try to take a look at this project, thanks to which you can create new colors from the ones you already have! you just need to check how much filament you need in grams to print a certain part and then proceed to create the new color in the necessary quantity, seriously this idea (which is not mine) is brilliant, thanks <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@jetpad">jetpad</a> ! <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497">https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497</a>&nbsp;The design includes:<ul style="list-style-type: disc"><li>Upper part: the character's main body, including helmet and visor.</li><li>Lower part: the character's legs, the bloody internal part, both designed to fit securely into the upper body.</li><li>Internal structure: fits perfectly into the internal part, adding a fun and recognizable detail.</li><li>Unique details: that immediately hint at which universe it comes from!</li></ul>This model is also ideal as a desk decoration, adding a playful touch next to your PC or workstation. Its compact size makes it suitable for any space… print them all!&nbsp;&nbsp;&nbsp;&nbsp;

Print Profile(7)

Description

Comment & Rating (15)

License

Related Models

AMONG US GUY x BNDER from the FUTURAMA UNIVERSE

Print Profile(7)

Description

Comment & Rating (15)

License

Related Models