Anycubic KX Cooling Front Cover 3510 Fan
Print Profile(1)
Description
This cooling front cover is designed for the Anycubic KX to address the poor heat dissipation of the original hot end, which often leads to clogging. The original thermal break base is made of zirconia ceramic, with a relatively high thermal conductivity (around 2). I replaced it with HIPHB material, which has a thermal conductivity of 0.25. Combined with this cooling front cover, the temperature is significantly reduced by at least 5 degrees. This model file is for the front cover.Note: Powder sintering is recommended for printing; SLA printing has been tested and is prone to softening and deformation. The fan is a 3510 size. The fan adapter board is available on Taobao and Bilibili, or you can purchase the finished product directly from my store. Thank you for your support. This model is for non-commercial use only
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)