Combined Display Mount for the Guition 4" Display
Print Profile(1)
Description
English:
Wall Mount for Guition ESP32-S3 4848S040 with NFC Reader & Power Supply
A professional all-in-one wall mount that brings your smart home panel cleanly and wirelessly to the wall – with no visible cables, no DIY compromises.
What is this? This mount combines the compact Guition ESP32-S3 4848S040 touch display with an integrated NFC reader and a hidden 230V power supply – all in a printable PLA enclosure. Perfect for use with Home Assistant, ESPHome and the "No Soldering DIY NFC TagReader" project.
Features
- Integrated compartment for Mean Well IRM-05-5 AC/DC power supply (5V / 1A / 5W)
- NFC reader sits behind the upper panel – invisible, but functional
- Direct connection: Display via 4-pin MX1.25 connector (PIN1 = GND, PIN4 = +5V)
- ATOM Lite connection via separate 4-pin socket
- Assembly with 4× M3 heat-set inserts and 4× M3×8 hex screws – solid and easy to maintain
- Clean, minimalist design that blends into any home
Required Hardware
- Guition ESP32-S3 4848S040
- Mean Well IRM-05-5 power supply
- M5Stack ATOM Lite (for NFC)
- 4× M3 heat-set inserts
- 4× M3×8 hex screws
Software
- ESPHome / ESPControl
- Home Assistant
- No Soldering DIY NFC TagReader
English:
Wall Mount for Guition ESP32-S3 4848S040 with NFC Reader & Power Supply
A clean, professional all-in-one wall mount that turns your smart home panel into a proper wall-installed device – no visible cables, no compromises.
What is this? This mount combines the compact Guition ESP32-S3 4848S040 touch display with an integrated NFC reader and a hidden 230V power supply – all in one 3D-printable PLA enclosure. Designed specifically for use with Home Assistant, ESPHome, and the "No Soldering DIY NFC TagReader" project.
Features
- Built-in compartment for Mean Well IRM-05-5 AC/DC power supply (5V / 1A / 5W)
- NFC reader sits behind the top panel – hidden yet fully accessible
- Direct wiring: display via 4-pin MX1.25 connector (PIN1 = GND, PIN4 = +5V)
- ATOM Lite powered via separate 4-pin socket (bottom pin = GND, second from bottom = +5V)
- Assembly using 4× M3 heat-set inserts and 4× M3×8 hex screws – sturdy and serviceable
- Clean, minimalist design that blends into any home interior
Required Hardware
- Guition ESP32-S3 4848S040
- Mean Well IRM-05-5 power supply
- M5Stack ATOM Lite (for NFC)
- 4× M3 heat-set inserts
- 4× M3×8 hex screws
Software
- ESPHome / ESPControl
- Home Assistant
- No Soldering DIY NFC TagReader
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (1)