Symarix TGU 21 G.hn Wall Mount

G.hn Modem Wall Mount for Symarix TGU 21

A sleek, print-optimized wall mount for the Symarix TGU 21 G.hn modem (dimensions 130 × 92 × 28.6 mm). Holds the modem securely to the wall and allows for maximum ventilation and access to all ports.

Features

• Completely printable without supports – lay flat on the print bed, done
• 4-point mounting with conical countersinks for M4 countersunk wood screws
• Maximum ventilation through ventilation slots on the back panel, side panels, and bottom
• Easy assembly: Modem is simply slid into the cradle from above
• Optimized for PETG, PETG-CF, and PLA

Stable design: 4 mm thick back wall, torque-resistant screw points

Print orientation

Lay the back panel flat on the print bed. The conical countersinks face upwards (cradle interior). This way, all overhangs print without supports, and the bridges over the slots are short enough for clean bridging.

Print settings:
0.2 Layer Height / 3-4 walls / 15% Gyroid INfill