Fahrleitungsmast der LAG/Catenary Mast of the LAG

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hoTiAOYqFk1

Scale / Scale
H0 = 100% - H0 Version

Model of an old catenary mast in 1:160 for N gauge from the early days of electric traction, based on the LAG. It was used here for the installation of a simple catenary. The cantilever was also attached to wooden masts.
Unfortunately, the mast cannot be printed in one piece. Carefully insert the cantilever into the openings of the mast. The cross-wire must be glued to the cantilever from below. Then you can insert the mast into the base and attach the mast foot accordingly.

N-H0 Old Catenary Mast AEG Version: https://www.thingiverse.com/thing:7153410
N-H0 Old Catenary Mast of the Albtalbahn: https://www.thingiverse.com/minuber/designs
N-H0 Old Catenary Mast of the Mittenwaldbahn: https://www.thingiverse.com/thing:7152012
N-Line Mast_DB: https://www.thingiverse.com/thing:6493663
H0-Line Mast_DB: https://www.thingiverse.com/thing:6777929
N-Line Mast_DRG: https://www.thingiverse.com/thing:6493670
H0-Line Mast_DRG: https: https://www.thingiverse.com/thing:6790100
N-Line Mast_DB_2-sided: https://www.thingiverse.com/thing:6777929
H0-Line Mast_DB_2-sided: https://www.thingiverse.com/thing:6790074