Print Profile(1)
Description
Delicate Art Nouveau lines, soft colors, and a reminder that society prefers “pretty" emotions only.
Project: Dont Be Sad 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.22441mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
#61c680 PLA BambuLab Matte Grass Green Transmission Distance: 2
#e4bdd0 PLA BambuLab Matte Sakura Pink Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Indigo Purple
At layer #13 (1.12mm) swap to Grey
At layer #14 (1.2mm) swap to Ice Blue
At layer #17 (1.44mm) swap to Grass Green
At layer #20 (1.68mm) swap to Grey
At layer #22 (1.84mm) swap to Sakura Pink
At layer #24 (2mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)