Aoi Todo (Todo) - Jujutsu Kaisen (JJK)

This dude and Megumi are probably my two favourite characters in JJK. He's a solid goon who will put the work down when needed and I totally respect it. 
Project: Todo Sent to Printer v1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #482960 PLA BambuLab Basic Indigo Purple  Transmission Distance: 0.8
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.5
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
    #b15533 PLA #BambuLab Matte Terracotta  Transmission Distance: 0.8
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #11 (0.96mm) swap to BambuLab Matte Dark Blue
    At layer #12 (1.04mm) swap to BambuLab Basic Indigo Purple
    At layer #14 (1.2mm) swap to BambuLab Basic Hot Pink
    At layer #16 (1.36mm) swap to #BambuLab Matte Caramel
    At layer #19 (1.6mm) swap to #BambuLab Matte Terracotta
    At layer #20 (1.68mm) swap to BambuLab Matte Mandarin Orange
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.