Genshin Impact Nefer's Tired Expression_Lumina Five-Color Layering

Created using Bilibili UP Dà Pàng Féimāo's open-source software Lumina-Layers

Emotes are from Genshin Impact Wiki

Filament used:

Elegoo PETG HF Red

Elegoo PETG HF Yellow

Elegoo PETG HF Blue

Elegoo PETG HF White

Elegoo PETG HF Black

A pause layer is added at layer 21 of the model. You need to manually change the filament at layer 21, replacing the white filament in the AMS with black filament; otherwise, the model will not have black

To minimize color deviation, try to use filaments from the same brand. Note: nozzle preset to 0.4mm, it is recommended to enable bed leveling, the sinkage rate in the filament settings must be the same, and when scaling, be careful not to change the Z-axis height. After reducing the size, it is recommended to check the slice preview for layers 1-6 to see if they are too small to print lines. If so, you need to enlarge it.