Wooden Railway Track - Repair Kit - Brio
Print Profile(1)
Description
Hello and Welcome to 3DEraTec!
When something breaks, it's often a shame. But it can always be repaired. With the Brio / Ikea wooden railway, the head of the track broke off, specifically at the bridge part.
Material / Filament: PETG or even better PETG CF or other fiber-reinforced ones.
Here are the instructions for the Repair Kit for the head.
Step 1: Check the bore, it should be 4mm!
Step 2: Drill out the hole with a Ø4 mm wood drill bit to a depth of approx. 6mm
Step 3: Insert the new head and glue it firmly. Adhesive / Glue / Superglue into the hole is a good idea.
Step 4: Let the glue dry. DONE
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)