Filament clip (Easy to install · Does not fall off easily · Truly does not interfere with AMS)

💁🏻If you encounter printing problems, please don't rush to rate~🙏🏻

Leave a comment and upload photos 🫶🏻I will help you solve it immediately!

🌟No AMS jamming / More stable with double buckle🌟

• Adopts a unique double buckle structure (Compared to conventional cylindrical designs, it is easier to install, compatible with various Bambu Lab filament spools, and firmly secured, not easy to fall off)
• Press the filament in with your thumb, pull to remove (Easier to pull out and less likely to break the filament)
• The model has a small contact surface at the bottom, so be sure to clean the build plate before printing (If you apply glue or are confident in the cleanliness of the build plate, you can disable the skirt)
• Optimized for all AMS limit protrusions, achieving complete non-interference (Specifically designed for AMS-HT, as its limit protrusions are more prone to interference)
• If there is excess plastic burr or injection molding misalignment on the filament spool mounting hole, it is better to trim it with a small knife before assembly (I have several high-temperature filament spools with severe injection molding misalignment, but they can still be installed by pressing firmly)

Tested filaments: PLA Basic, PLA Lite, PETG HF

(Print with the corresponding filament, avoid using PLA on other high-temperature materials, as high-temperature drying can easily cause deformation or softening)

If you encounter any problems during printing, feel free to leave a comment or send me a private message.
I will assist you in identifying the problem and providing a solution as soon as possible.🙏🏻

For faster processing, you can attach:

• Photos of the problem📷✨
• Filament brand and model🧵
• Printing parameters (layer height/temperature/speed, etc.)🔧

Let's work together to ensure you can complete your prints smoothly and with high quality.😊

💡Click to view《Print Quality Solutions》 to troubleshoot problems 💡

Ratings are very important to creators   You can read《Rating Guidelines》 then rate