cowboy in bike Hueforge
Print Profile(1)
Description
Another one with a pause enabled so that you can change fillaments in AMS . Have fun and post pics of your prints!
Project: cowboy in bike.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm
The Model is 166.42x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.48mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #16 (0.72mm) swap to Blue Gray
At layer #19 (0.84mm) swap to Red
At layer #20 (0.88mm) swap to Pumpkin Orange
At layer #22 (0.96mm) swap to Latte Brown
At layer #24 (1.04mm) swap to Jade White for the rest.
Boost Me (for free)
Remember to boost prints you like!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)