pokemon - Yveltal Infographic Hueforge
Print Profile(1)
Description
pokemon - Yveltal Infographic Hueforge
model is 20x20cm in size
can be scaled but dont adjust the Z hight!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.16mm
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#757575 PLA BambuLab Matte Nardo Gray Transmission Distance: 0.7
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Blue Gray
At layer #6 (0.56mm) swap to Black
At layer #7 (0.64mm) swap to Red
At layer #16 (1.36mm) swap to Hot Pink
At layer #18 (1.52mm) swap to Nardo Gray
At layer #19 (1.6mm) swap to Maroon Red
At layer #20 (1.68mm) swap to Sky Blue
At layer #21 (1.76mm) swap to White for the rest.
Membership
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)