V3.0 1" Ratchet Strap Saver Corner
Print Profile(1)
Description
Boost Me (for free)
I would appreciate a boost if you find this useful!
Version 3.0 of my popular ratchet strap corner. Added 3 tabs per side to fully constrain the strap inside of the corner protector. The tabs assists when strapping things down by keeping the corner protector attached to the strap and not falling. It also minimizes the corner protectors from moving before the strap is tight. Note depending on what you are strapping down your strap may not be at 90 degrees so you can easily pop your strap out of one or two sets of the tabs if needed to allow the strap to be at the angle it needs to be when tightened. See the pictures for examples.
Original: https://makerworld.com/en/models/2117715-1-ratchet-strap-saver-corner#profileId-2291918
V2.0 with single middle tab: V2.0 1" Ratchet Strap Saver Corner - Free 3D Print Model - MakerWorld
Use this when ratchet strapping down a load over a sharp corner to prevent damaging your strap. It also allows the tension in the strap to apply force to your load more evenly opposed to bending a sharp corner. That's the key difference between other similar models, this has a full radius to allow the strap to slide around it more easily that bending over a sharp corner. This is for a standard 1" ratchet strap and there is the minimalist version as well as one that is a little bit longer on each side.
Click my username to check out my other wood working tools and give me a follow so you don't miss any future designs!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)